another what cam,carb LQ9
another what cam,carb LQ9 3200 lbs 3.42 gears stock compression LQ9 317s bowl ported runners cleaned up GM single plane intake 750 hp carb msd 6010 turbo 400 convertor PTC stall TBD 4000-5000 not a daily driver,somewhat max effort would like to run 10.70s-10.50s then hit it with some dope for 9.70-9.50s
motor already has ARP rod and head bolts 5 layer gm head gaskets LS2 timing set stock length good pushrods
I have a cam I bought used here a while back it's 244-248 113+3 .579 don't know what kind of lobes no cam card with it supposedly it's a comp cam
I'm starting to thik I don't have enough cubic inch,compression or even gear to make this cam work I know theirs better choices for a low compression motor like a dominator 2x or anything 230-236 110 what do you think
motor already has ARP rod and head bolts 5 layer gm head gaskets LS2 timing set stock length good pushrods
I have a cam I bought used here a while back it's 244-248 113+3 .579 don't know what kind of lobes no cam card with it supposedly it's a comp cam
I'm starting to thik I don't have enough cubic inch,compression or even gear to make this cam work I know theirs better choices for a low compression motor like a dominator 2x or anything 230-236 110 what do you think
