sayed_000

it's the time to get a set of heads for the car ..

car made 341/350 with cam only + tune ..

now i added LT's + LS6 intake + lid


and planning to port the TB + get a bigger maf + heads


what heads flow well with my cam specs ?

• PRC LS6 Stage 2.5 CNC Ported Heads
• AFR LS1 225cc 65cc Chamber Cylinder Heads

any input will be appreciated

Jason 98 TA

iTrader: (4)

Both are good heads, & I don't think you'd be unhappy with either setup. That being said if your looking at the AFR price range you should look at the PRC 215 heads. They have a altered valve angle, 215cc runner, smaller chambers & better p/v which allows for more milling & better compression!

That being said the PRC LS6 heads are really really nice for the $$$. For just about $700 less than the other two options you get a proven set of heads that constantly make good power.

215s
http://www.texas-speed.com/shop/item...d=993&catid=20

LS6 Stage 2.5
http://www.texas-speed.com/shop/item...d=134&catid=40

TrickFlowTech

Trick Flow 215cc or 225cc heads would work great for your combination! Give us a call anytime if you have questions.