Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

help identify this sound?

Thread Tools
 
Search this Thread
 
Old Jan 30, 2010 | 05:53 AM
  #1  
pheer's Avatar
Thread Starter
TECH Enthusiast
iTrader: (3)
 
Joined: Jun 2009
Posts: 563
Likes: 0
From: Houston, Tx
Default help identify this sound?

i removed the AIR system when i put in my LTs....
now when i start the car it sounds like air leaking out somewhere.... or being sucked in... either way it wasn't there before and i'm wondering if i need to plug something and whether it's something that could harm my engine?
i can try to describe it better a bit later, lack of sleep is limiting my thought capacity... also, it seems to fade away for the most part as the engine warms up... sometimes it goes completely away, others it will stay, jus very faint...

any help is appreciated!!
Reply
Old Jan 30, 2010 | 09:45 AM
  #2  
98TA_vert's Avatar
On The Tree
 
Joined: Mar 2005
Posts: 156
Likes: 0
From: South Jersey
Default

did u disconnect the AIR pump or is it still electrically hooked up cause that might be what ur hearin once the car gets warm enough the AIR pump stops cycling(the pcm thinks the cats get warm no xtra o2 need to help light the cats off)
Reply
Old Jan 30, 2010 | 09:52 AM
  #3  
King Nothing's Avatar
TECH Veteran
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (9)
 
Joined: Oct 2005
Posts: 4,768
Likes: 26
From: Central Valley
Default

yep try taking the pump out and taking the fuse out also
Reply
Old Jan 30, 2010 | 10:10 AM
  #4  
zaner's Avatar
TECH Apprentice
iTrader: (16)
 
Joined: Jun 2004
Posts: 311
Likes: 0
Default

I also think its the air pump , I had the exact same symptoms...I had pulled the fuse and I also went underneath the front drivers side and took all the air pump hoses ,connections, and the pump itself out...it was a bit of weight saving too boot
Reply
Old Jan 30, 2010 | 05:04 PM
  #5  
pheer's Avatar
Thread Starter
TECH Enthusiast
iTrader: (3)
 
Joined: Jun 2009
Posts: 563
Likes: 0
From: Houston, Tx
Default

the pump and all tubing is sitting in the garage, so it can't be that
there was a small tube that connected to the top of the junction for all the tubing, but i plugged that on one of the bolts that was around it

anything else it could be? i can't see the fuse doing anything, but once i get my PCM and TB back ill pull the fuse and see if that does anything
Reply




All times are GMT -5. The time now is 10:46 PM.