Cam swap and heads getting worked...
#1
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: Texas
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
Cam swap and heads getting worked...
Doing a cam swap in my CTS-V LS6. Heres the recipe:
TSP 233/239 W/ PRC dual spring and pushrod kit
10% UD Powerbond
Heads will go to my local machine shop for 3 angle valve job, resurfacing and assembly. Shop said i should go with matched gaskets. Is he talking about head gaskets or intake/exhaust gaskets?
TSP 233/239 W/ PRC dual spring and pushrod kit
10% UD Powerbond
Heads will go to my local machine shop for 3 angle valve job, resurfacing and assembly. Shop said i should go with matched gaskets. Is he talking about head gaskets or intake/exhaust gaskets?