Help me asap, ring install Q's???

Reply Subscribe

Thread Tools

Search this Thread

Feb 20, 2010 | 07:33 PM

Maroslut2001

Thread Starter

Launching!

iTrader: (2)

Joined: Feb 2009

Posts: 225

Likes: 0

From: Morrison, Colorado

Help me asap, ring install Q's???

Ok i ordered a set of perfect circle rings and my dumbass got them all mixed up and i dont know which ring is the top ring and which is the second ring... one ring is just plain on top and bottom with the outside edge silver, and the other has a dot on one side and the other side has like a little beval on the outside edge with the outside edge black... both rings are black top and bottom.

I need help fast cause grinding the rings is my next step lol

Feb 20, 2010 | 08:03 PM

lavoy

TECH Apprentice

iTrader: (2)

Joined: Dec 2009

Posts: 368

Likes: 1

the bottom rings will be the crappy cast ones and the top ones will be the nicer non cast ones.

Feb 20, 2010 | 08:24 PM

Maroslut2001

Thread Starter

Launching!

iTrader: (2)

Joined: Feb 2009

Posts: 225

Likes: 0

From: Morrison, Colorado

Neither of the rings look to be cast... i am assuming the second ring is the one with the dot and the beval on the bottom outside edge.

Anyone else??????

Feb 21, 2010 | 07:34 PM

SSPerformance

8 Second Club

iTrader: (76)

Joined: Jun 2004

Posts: 2,902

Likes: 0

From: Goshen NY

the second ring should have a scraper on the bottom outside edge

Feb 22, 2010 | 03:16 PM

jkkaz

Staging Lane

Joined: May 2009

Posts: 96

Likes: 1

Did the rings come with an instruction guide? They sound like the sealed power ones I put in the last car I rebuilt. The dot and the bevel were both indications of where and which side went up or down.

Reply Subscribe