Which cam for me?
Thread Starter
TECH Fanatic
iTrader: (22)
Joined: Apr 2002
Posts: 1,621
Likes: 2
From: Louisville, Ky
Which cam for me? I'm looking for a cam for my all-motor daily driver with 'decent' street manners with a mean lope that will work well with Stage 2 5.3 heads. I don't want to rev past 6600 rpm and I plan on using 4.10 and maybe even 4.30 gears. 99.9% of my racing is street racing from a 10-15mph roll so I don't think 4.30's would be too bad with 315 Nitto DR's, do you? I was thinking about the TR 224/224 .563/.563 112 cam but I'm not sure if its too aggressive. How would that drive compared to a 226/226 .581/.581 114 cam (someone suggested it?) I also plan on doing an LS6 intake, long tube headers, Shaner ported throttle body and possibly an 85mm MAF and ASP underdriven crank pulley. What do you think would be a good cam for me? Thanks for any help- Mike W.
P.S. Will I need to get a Walbro Intank 340 fuel pump to feed this package. Will I be ok with factory tuning and a MAFT with A-tap?
<small>[ February 21, 2003, 07:04 PM: Message edited by: SStolen ]</small>
P.S. Will I need to get a Walbro Intank 340 fuel pump to feed this package. Will I be ok with factory tuning and a MAFT with A-tap?
<small>[ February 21, 2003, 07:04 PM: Message edited by: SStolen ]</small>
