-.016 deck height?
Thread Starter
On The Tree
iTrader: (1)
Joined: Jan 2008
Posts: 136
Likes: 0
From: mobile alabama /south Floria
-.016 deck height? -.016 deck height is what came up,
machinest said there was a ding and had to mill.he never said how much.
.016 is what i got ,w/317 heads and .052 mls gaskets.the pistons are JE #883 flat tops/ -2cc valve releaves.figure he took 10.
am i ok????????????????????????????
mike
machinest said there was a ding and had to mill.he never said how much.
.016 is what i got ,w/317 heads and .052 mls gaskets.the pistons are JE #883 flat tops/ -2cc valve releaves.figure he took 10.
am i ok????????????????????????????
mike
-.016 deck height is what came up,
machinest said there was a ding and had to mill.he never said how much.
.016 is what i got ,w/317 heads and .052 mls gaskets.the pistons are JE #883 flat tops/ -2cc valve releaves.figure he took 10.
am i ok????????????????????????????
mike
machinest said there was a ding and had to mill.he never said how much.
.016 is what i got ,w/317 heads and .052 mls gaskets.the pistons are JE #883 flat tops/ -2cc valve releaves.figure he took 10.
am i ok????????????????????????????
mike
Shane
Thread Starter
On The Tree
iTrader: (1)
Joined: Jan 2008
Posts: 136
Likes: 0
From: mobile alabama /south Floria
it is together now! we are going to put the heads on tomarrow,
.016 is at center of pin.
we did not want to take the material of the top as there is only .200 on th JE 883's.i found a couple of threads withe the same issue and were fine.
thanks guy's
mike
.016 is at center of pin.
we did not want to take the material of the top as there is only .200 on th JE 883's.i found a couple of threads withe the same issue and were fine.
thanks guy's
mike
