lq4 cam opinions here
Teching In
Joined: Jan 2007
Posts: 37
Likes: 1
From: Cheshire, UK
Hi All,
I'm opening a slightly aged thread as I'm also looking for LQ4 cam choice advice.
Base engine is an LQ4 block with steel 4" crank, steel H rods (6.125") & forged flat top Mahle Pistons (4.005").
Heads are ported L92s with cc'd chambers giving 10.9:1 CR
FAST intake using 39lb/410cc injectors and 90mm TB.
I'd very much like recommendations for a street cam spec. (I'm using hydraulic rockers) which would help me get 500bhp on the engine dyno?
Many thanks for any advice.
I'm opening a slightly aged thread as I'm also looking for LQ4 cam choice advice.
Base engine is an LQ4 block with steel 4" crank, steel H rods (6.125") & forged flat top Mahle Pistons (4.005").
Heads are ported L92s with cc'd chambers giving 10.9:1 CR
FAST intake using 39lb/410cc injectors and 90mm TB.
I'd very much like recommendations for a street cam spec. (I'm using hydraulic rockers) which would help me get 500bhp on the engine dyno?
Many thanks for any advice.
