Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Engine removal help!

Thread Tools
 
Search this Thread
 
Old 08-11-2010 | 04:27 PM
  #21  
Z28/2002's Avatar
11 Second Club

iTrader: (27)
 
Joined: May 2005
Posts: 6,799
Likes: 3
From: Your girl's back door giving her the long stroke while you're at work
Default

Pulled the motor in my car out the top a couple times now and will never drop the K-member. I can have it on the ground in less than 45 minutes


Originally Posted by RsSean
how bout the 3 bolts that hold the torque convertor to the flexplate?
I pull the starter off to get to the ones on my TH350. Put a socket and ratchet on the crank pulley and rotate it around until the bolt is in the "sweet spot"

Last edited by Z28/2002; 08-11-2010 at 04:34 PM.
Old 08-13-2010 | 05:10 PM
  #22  
bigpat501's Avatar
Staging Lane

iTrader: (5)
 
Joined: Jun 2004
Posts: 68
Likes: 0
From: houston TX
Default

i always put some grease on the dowel pins so it comes off easier next time




All times are GMT -5. The time now is 05:19 AM.