Crane lifter help needed..Please look inside
Thread Starter
Teching In
Joined: Nov 2002
Posts: 28
Likes: 0
Crane lifter help needed..Please look inside Bought some used Crane rollers and would like any help in identifying the differences for their parts numbers...
Crane says:
Chevrolet V-8 87-98, 305 and 350 cu. in. and LS1
P/N 10530-16a
O.E. design for 87-98 blocks originally equipped with hydraulic roller cam and lifters. For use with standard GM alignment bars.
Chevrolet V-8 87-98, 305 and 350 cu. in. and LS1
P/N 10535-16a
Long travel design for 87-98 blocks originally equipped with hydraulic roller cam and lifters. A necessity when camshafts have greater than stock lobe lift or reduced base circle diameter. For use with standard GM alignment bars.
Chevrolet V-8 2000-up, 5.7L LS1
P/N 144530-16a
O.E. Design for 2000-up blocks originally equipped with hydraulic roller cam and lifters. For use with standard GM alignment bars.
Crane says:
Chevrolet V-8 87-98, 305 and 350 cu. in. and LS1
P/N 10530-16a
O.E. design for 87-98 blocks originally equipped with hydraulic roller cam and lifters. For use with standard GM alignment bars.
Chevrolet V-8 87-98, 305 and 350 cu. in. and LS1
P/N 10535-16a
Long travel design for 87-98 blocks originally equipped with hydraulic roller cam and lifters. A necessity when camshafts have greater than stock lobe lift or reduced base circle diameter. For use with standard GM alignment bars.
Chevrolet V-8 2000-up, 5.7L LS1
P/N 144530-16a
O.E. Design for 2000-up blocks originally equipped with hydraulic roller cam and lifters. For use with standard GM alignment bars.
