![Ethan[ws6]'s Avatar](https://ls1tech.com/forums/customavatars/avatar139269_2.gif){kind=avatar}
243 Pushrod Length
243 Pushrod Length I bought a set of stock 243s for my 00 Camaro SS that I am going to be installing with a Torquer V.2 cam. I searched and searched, but i cant really find a concise answer on what length pushrod I should be using. Any insight would be greatly appreciated. Thank you!
Rocco
Rocco
Thanks for all the replies everyone. However i have a question being that im very new to all this. If this has been done before (ls6 heads and torquer cam) why cant someone tell me if i will be 100% ok one way or the other? I would just like to know, does it vary from car to car?
Many things have an affect on pushrod length, have the heads been milled at all, head gasket thickness, lifters, ect. that is why it is always best to measure even more so when assembleing used parts you never know what was done to the heads.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
By all means, do a search and read up. There is lots of good info here. You will feel much better the first time you go to start her up knowing you measured and did it right.
