LS1TECH - Camaro and Firebird Forum Discussion

Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Removal of Intake Required to Replace Cam Sensor?

Thread Tools
 
Search this Thread
 
Old 01-31-2004 | 10:21 AM
  #1  
Josh's Avatar
Josh
Thread Starter
TECH Fanatic
iTrader: (9)
 
Joined: Feb 2002
Posts: 1,061
Likes: 0
From: West Lafayette, IN
Default Removal of Intake Required to Replace Cam Sensor?
Do any of you know if it's possible to replace the cam position sensor without removing the intake? Seems like a long shot, but I thought I'd ask before diving in.

Thanks,
Josh
Reply Like
Old 01-31-2004 | 10:57 AM
  #2  
PHIL H's Avatar
PHIL H
TECH Enthusiast
iTrader: (13)
 
Joined: Nov 2001
Posts: 565
Likes: 0
From: KS
Default
It would be real difficult..It only takes about 20 minutes to get the intake off anyway!! Good luck..
Reply Like
Old 01-31-2004 | 12:23 PM
  #3  
felton316's Avatar
felton316
TECH Addict
 
Joined: Nov 2001
Posts: 2,593
Likes: 0
From: TEXAS
Default
You could, but it would be like changing your brake pads without taking off your wheel. 20 minutes tops to remove the intake, and the cam sensor would then be looking right at you.
Reply Like
Old 01-31-2004 | 12:36 PM
  #4  
Josh's Avatar
Josh
Thread Starter
TECH Fanatic
iTrader: (9)
 
Joined: Feb 2002
Posts: 1,061
Likes: 0
From: West Lafayette, IN
Default
Thanks guys, we just finished up. It didn't take as long as I thought it would, but my car still won't start.

Josh
Reply Like
Tags
Back to Subforum
Generation III Internal Engine
View Next Unread
Replacing stk head haskets on stk heads, any difference between the 97-01 and 02's?




Advanced Search
Quick Reply: Removal of Intake Required to Replace Cam Sensor?


Reply Closed Thread Share

All times are GMT -5. The time now is 07:20 PM.