Whats all needed for a reliable stroker?

Reply Subscribe

Thread Tools

Search this Thread

Feb 10, 2004 | 01:56 PM

Timmay!!!

Thread Starter

Teching In

Joined: May 2003

Posts: 20

Likes: 0

Whats all needed for a reliable stroker?

Hey guys, I am going stroker and I would like to make a list of everything needed, anyone care to help. I plan on a 383 or 396, low compression for boost. Here is what I know I need, please add to the list:
forged pistons
Crank
Rods
Bearings
LS6 oil pump
rings

Can anyone add what else?

Thanks in advance, Timmay!!!

Feb 10, 2004 | 02:33 PM

BOO HOO BRIAN

PSJ Wannabe & Attention Whore

iTrader: (-10)

Joined: Jan 2004

Posts: 531

Likes: 0

For a 500-600 hp stroker:

Eagle 4.000 stroker crank
Eagle H beam rods
Diamond shelf pistons w/ pins
Diamond Proselect ring set
Federal Mogul main bearings
Clevite rod bearings

For 600 + :
Callies 4.000 stroker crank
Callies H beam rods
Diamond pistons w/ tool steel pins
Diamond Proselect ring set
Federal Mogul main bearings
Clevite rod bearings

Feb 10, 2004 | 02:55 PM

Kens_02SS

TECH Fanatic

iTrader: (11)

Joined: Jul 2002

Posts: 1,034

Likes: 0

From: Ft.Campbell, KY..dam Army

Quote:

Originally Posted by Brian@AP-Engineering

Hey Brian anymore info on those ready to use blocks for strokers?

Feb 10, 2004 | 03:50 PM

Mike TexaSS

8 Sec Tuner

iTrader: (2)

Joined: Jan 2002

Posts: 4,641

Likes: 0

From: Wish I was in a boat fishing...

A Freekin Double roller Timing Chain!!

Ask me how i know?

1500 miles into my 382 Stroker i bent 14 of the 16 Valves. Thank god for forged pistons.

Screw the stock chain