6.0 Swap Question

Reply Subscribe

Thread Tools

Search this Thread

Feb 1, 2011 | 10:14 AM

wytry

Thread Starter

TECH Regular

iTrader: (6)

Joined: Oct 2009

Posts: 429

Likes: 0

From: Norton, Ohio

6.0 Swap Question

Can somebody direct me to where I can find all the necessary conversion parts/harnesses/etc for an LS1 to 6.0 swap? I would prefer to buy everything as a kit, but if I have a list I don't mind piecing the parts together.

The search function didn't help, and I'm not a newb. Nor did Google return any real results. Thanks for any help

Feb 1, 2011 | 04:40 PM

Mateo M3

Teching In

iTrader: (1)

Joined: Dec 2007

Posts: 39

Likes: 0

i thinks if you already have the ls1 then you got everything u need. just swap over intake, balancer, etc... (6.ltr truck engine right?)

Feb 1, 2011 | 05:18 PM

Cold06

11 Second Club

iTrader: (9)

Joined: Oct 2010

Posts: 144

Likes: 0

From: Louisiana

Texas Speed has a kit for 300 I think!

Feb 1, 2011 | 06:04 PM

SOMbitch

TECH Senior Member

iTrader: (8)

Joined: Sep 2007

Posts: 6,881

Likes: 3

6.0 is gen III your LS1 stuff just swaps over... The kit is needed for a gen III to Gen IV swap....

Feb 1, 2011 | 07:49 PM

rich5368

TECH Regular

iTrader: (2)

Joined: Apr 2010

Posts: 442

Likes: 0

From: Cheyenne, WY

Plug and Play.

Feb 2, 2011 | 11:05 AM

Sales4@Texas-Speed

LS1TECH & Trucks Sponsor

iTrader: (4)

Joined: Jan 2007

Posts: 1,768

Likes: 9

If it is a gen III block then everything from your previous motor will swap right over. The only difference is the alternator bracket only has 2 holes when the aluminum block had 3. You can either go with 2 bolt holes or drill and tap a 3rd if you want.

Feb 2, 2011 | 09:14 PM

wytry

Thread Starter

TECH Regular

iTrader: (6)

Joined: Oct 2009

Posts: 429

Likes: 0

From: Norton, Ohio

I was under the impression that some of the sensors were different and/or in different locations, thus needing extensions or adaptors. If that's wrong then I'm a happy camper