422 solid roller ...!!
Thread Starter
TECH Fanatic
Joined: Apr 2002
Posts: 1,560
Likes: 0
From: kuwait
422 solid roller ...!! I am thinking about 422 solid roller ,so who know some info or tried it ? i need the car for street racing and some times for track!
Thanks
Adnan
<small>[ February 26, 2003, 09:11 AM: Message edited by: oOoLy ]</small>
Thanks
Adnan
<small>[ February 26, 2003, 09:11 AM: Message edited by: oOoLy ]</small>
I can shift faster than you.
iTrader: (21)
Joined: Nov 2001
Posts: 5,133
Likes: 0
From: Baton Rouge, LA
Re: 422 solid roller ...!! Futral Motorsports built a 434ci solid roller a few months back. The cam was very tame and it was still using 5.3l truck castings. It pulled 550rwhp/506rwtq. With some LS6 casting and a more aggressive cam, 570rwhp would have been easily attainable. This was through an LS6 intake and the car had a Moser 12-bolt/4:10s. The car has gone high 10s@over 130mph spinning down the track on some wore out ET Streets with a raceweight close to 3700lbs.
Jason
Jason
<small>[ February 26, 2003, 02:21 PM: Message edited by: Jason99T/A ]</small>
Jason
Jason
<small>[ February 26, 2003, 02:21 PM: Message edited by: Jason99T/A ]</small>
TECH Junkie
Joined: Nov 2001
Posts: 3,987
Likes: 0
From: Melbourne, FL
Re: 422 solid roller ...!! </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Jason99T/A:
<strong>This was through a LS6 intank and the car had a Moser 12-bolt/4:10s.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">How do you fit an LS6 in the tank???? <img border="0" alt="[jester]" title="" src="graemlins/gr_jest.gif" />
<small>[ February 26, 2003, 02:09 PM: Message edited by: GeorgeC ]</small>
<strong>This was through a LS6 intank and the car had a Moser 12-bolt/4:10s.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">How do you fit an LS6 in the tank???? <img border="0" alt="[jester]" title="" src="graemlins/gr_jest.gif" />
<small>[ February 26, 2003, 02:09 PM: Message edited by: GeorgeC ]</small>
I can shift faster than you.
iTrader: (21)
Joined: Nov 2001
Posts: 5,133
Likes: 0
From: Baton Rouge, LA
Re: 422 solid roller ...!! lol George.. it must be a new mod. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
LS6 INTAKE <img border="0" title="" alt="[Razz]" src="gr_images/icons/tongue.gif" />
LS6 INTAKE <img border="0" title="" alt="[Razz]" src="gr_images/icons/tongue.gif" />
TECH Regular
Joined: Nov 2001
Posts: 455
Likes: 0
From: Houston, TX USA
Re: 422 solid roller ...!! Have not done a 422 solid roller, but I have quite a few 396's, and a 408 iron block. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
We are going to do a solid roller C5R headed engine also in the near future!
We have custom lifters we use for the LS1 also.
Give me a call. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
We are going to do a solid roller C5R headed engine also in the near future!
We have custom lifters we use for the LS1 also.
Give me a call. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
