Radiator for Custom ls1 application
Thread Starter
Teching In
Joined: Feb 2011
Posts: 4
Likes: 0
Radiator for Custom ls1 application As I stated in my introduction, we're doing a 1954 Cadillac CoupeDeville w/ a 2004 GTO lS1. I'm using a 80 Firebird subframe, but have retofitted most of the original rad support from the Cadillac which is going to limit me to radiator choices. I'm only going to be able to go approx 20"W x 30" tall. I've seen some Jeep conversion radiators that may work, I'm looking for advice on what I need to look for, a typical cross flow, I dont think will fir bc of my width issues, I had hear that both inlet and outlet need to be on the same side, but I'm looking here for advice on what I need to look for...any help would e appreciated.....Thanks
