Head bolt Has anyone had a head bolt strip in the block and drilled it out and tapped it with a bigger bolt ? A friend of mine doing the work to my car had this happen and had to do this and i was wondering if anyone else has experienced this and if its a common thing ? Thanks:eek2: |
.... bump |
I had one break when installing headers but I got it out honed the hole with a spare bolt by flatening 2 sides and going in and out clearing the hole. Got the idea of google header bolts fit perfectly after. If you are talking about the head bolts then thats a whole nother story |
I just swapped my heads with no issues of stripping. I would def say this is not a common thing. |
The bolts which attach the heads to the block need to apply the same force or the head will warp. It is unlikely you could accomplish this by mixing in a single bolt of different material and size. Better to use a threaded insert (Timesert?) |
Look thru this thread: https://ls1tech.com/forums/generatio...ipped-lsx.html |
Heli- coil thread repair kit may be an option. |
Hes all ready drilled it out and put the bigger bolt in. |
Originally Posted by VandykeT/A
(Post 14679594)
Hes all ready drilled it out and put the bigger bolt in. |
All times are GMT -5. The time now is 09:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands