Ls1 Build, Valve Train Suggestions!!!!
#1
Launching!
Thread Starter
iTrader: (7)
Join Date: May 2010
Location: 510
Posts: 250
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i have a stock ls1 block
f7-114 cam (224"/230" .588"/.595" 114LSA)
ported 317 heads
probably will be going with Edelbrock intake w/ elbow
looking for recomendations for lifters/pushrods, valves and rockers
f7-114 cam (224"/230" .588"/.595" 114LSA)
ported 317 heads
probably will be going with Edelbrock intake w/ elbow
looking for recomendations for lifters/pushrods, valves and rockers
#4
TECH Addict
iTrader: (39)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Lifters: LS7 work great.
Pushrods: They are pretty much all made by the same company, so it doesnt matter.
Springs: Anything .625 + rated lift would be good. You dont want to run something just above what your lift is. Keeping a safety margin is a good idea.
Valve: stock valves will be just fine.
Pushrods: They are pretty much all made by the same company, so it doesnt matter.
Springs: Anything .625 + rated lift would be good. You dont want to run something just above what your lift is. Keeping a safety margin is a good idea.
Valve: stock valves will be just fine.