Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

which futral cam?

Thread Tools
 
Search this Thread
 
Old 04-07-2011, 07:13 AM
  #1  
On The Tree
Thread Starter
iTrader: (11)
 
speedracer1280's Avatar
 
Join Date: Oct 2006
Location: hattiesburg, ms
Posts: 128
Likes: 0
Received 0 Likes on 0 Posts

Default which futral cam?

I have a f 14 112 Lsa .595 lift and the HL f14 intake side is.642 lift... orginaly had bought the low lift for my setup. then ran across f 14 HL 114 Lsa.. I have deciced to go with the low lift f 14 for my stock bottom end, stock ls6 heads, 92/92 setup, M6 setup in a 02 trans am..

whats the deal with the high lift f14? would it be a better choice for my stock bottom end setup? what setups are you guys running with that cam??. I also am looking for that race car sound with the Lsa112 on that low lift cam..
Old 04-07-2011, 08:00 PM
  #2  
On The Tree
Thread Starter
iTrader: (11)
 
speedracer1280's Avatar
 
Join Date: Oct 2006
Location: hattiesburg, ms
Posts: 128
Likes: 0
Received 0 Likes on 0 Posts

Default

wow... 40 hits and no responses...
Old 04-07-2011, 08:06 PM
  #3  
TECH Enthusiast
iTrader: (29)
 
Evans752's Avatar
 
Join Date: Jan 2005
Location: Logan, West Virginia
Posts: 565
Likes: 0
Received 1 Like on 1 Post

Default

My opinion I would stick with the F14 regular lift because the high lift would I would think need alot more compression motor than the stock 10.1 ls1 I would think and a real good flowing set of heads (more than 241/243) aftermarket, but I am no expert LOL. I see in your signiture thatn you have 3.42 gears, I would think you would need a little more gear (3.73) for the auto, option.
Old 04-07-2011, 08:17 PM
  #4  
TECH Senior Member
iTrader: (35)
 
99Bluz28's Avatar
 
Join Date: Nov 2007
Location: C. V., Kalifornia
Posts: 9,705
Likes: 0
Received 11 Likes on 11 Posts
Default

IMO, I'd get the heads ported and buy some LT headers first, otherwise your just wasting you time and money on lift you really can't get much benefit from.
Old 04-07-2011, 08:44 PM
  #5  
Banned
 
Midnite Magic's Avatar
 
Join Date: Apr 2011
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
Default

F13 works good on a stock bottom end




All times are GMT -5. The time now is 06:31 AM.