Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

need advice

Thread Tools
 
Search this Thread
 
Old Apr 18, 2011 | 03:01 PM
  #1  
ICEY?'s Avatar
Thread Starter
Staging Lane
iTrader: (1)
 
Joined: Aug 2007
Posts: 61
Likes: 0
Default need advice

ok, so i have an rx7 with a 99 comaro ls1,


it was getting like 30psi fuel pressure, swapped out fuel pump, and FPR/filter (has vette FPR/Filter on car)


it did NOT fix the problem... then i swaped out the fuel pulsation dampener on the fuel rail and the car ran alot better, like it should...



shut the car off and let it sit for about 45min, then it wouldnt turn back on, it would jsut spin the motor.


so i went to bleed the end of the fuel rail and nothing came out...



Took the old dampner off and a lot of fuel came out, put the old one back on and the car still won't start....

Could I have trashed my fuel filter? Or what could be wrong?
Reply
Old Apr 18, 2011 | 10:19 PM
  #2  
ICEY?'s Avatar
Thread Starter
Staging Lane
iTrader: (1)
 
Joined: Aug 2007
Posts: 61
Likes: 0
Default

update***

put in another fuel pump, car starts now but runs like doo doo, it sputters and has zero power...
Reply




All times are GMT -5. The time now is 01:01 AM.