Pushrod Length?
Pushrod Length? Alright, so I know I am gonna have to measure regardless but I have a pretty common setup so I was hoping someone could tell me what they used or at least point me in the general area so I can order 2 sets of pushrods and not have any downtime. Basically I have 317s and an ls6 cam on an ls6 block and will be using stock rocker arms and ls7 lifters. I know stock length PRs are 7.4" and the ls6 cam has a smaller base circle and the 317 heads are a bit taller than stock so I should be around 7.425", right?
If anybody has this setup, please step in and let me know what you used.
Thanks.
If anybody has this setup, please step in and let me know what you used.
Thanks.
Yes, I also figured I would get someone saying that. I have tried the search to no avail. If you can use the search to find what I'm looking for then go ahead. I would be happy to look dumb if it got me an answer.
I'm sorry if it seems like I'm wasting everyone's time but the search function on this site is not very user friendly. Once again, I have searched multiple times and with no usable results. And I do intend to measure regardless. I just wanted to know if anyone could tell me what they used so I know what 2 sets to order.
I'm sorry if it seems like I'm wasting everyone's time but the search function on this site is not very user friendly. Once again, I have searched multiple times and with no usable results. And I do intend to measure regardless. I just wanted to know if anyone could tell me what they used so I know what 2 sets to order.
