Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

low timing

Thread Tools
 
Search this Thread
 
Old Jun 27, 2011 | 05:35 PM
  #1  
IamSam's Avatar
Thread Starter
Staging Lane
iTrader: (2)
 
Joined: Jan 2011
Posts: 64
Likes: 0
Default low timing

I just replaced my 2 knock sensors in my 01 lq4. The check engine light went away so all is well i suppose. I noticed that my timing at cruise is around 38 degrees and at wot its about 16-18 degrees depending on rpm. Is this right or is somthing wrong? Stock engine and this is according to my scan tool. Thanks
Reply
Old Jun 27, 2011 | 06:49 PM
  #2  
trance565's Avatar
Staging Lane
iTrader: (4)
 
Joined: Aug 2006
Posts: 67
Likes: 0
From: Houston
Default

Seems a bit low at wot, 38 in cruise cells is acceptable depending on the setup
Reply




All times are GMT -5. The time now is 07:53 AM.