02WS6#519

I had my heads flowed today. Here are the numbers. Let me know what you guys think. The heads have 2.02/1.60 Ferrea Valves on them.

.100=89/84
.200=166/134
.300=227/177
.400=269/216
.500=293/243
.550=297/249
.600=303/252

Thanks
Ever

98SS Blackattack

Nice #'s.What heads are they?

02WS6#519

Thanks! They are stock ported 241's.

kumar75150

stock?

Brian Tooley Racing

iTrader: (13)

Looks like about a 20 cfm leak on both sides. Basically a good intake and exhaust port is going to flow in the 60 something range at .100" no matter how good the ports are, and the .200" is mostly the same way, so if you subtract 20 from those lift points you have more realistic flow numbers. Even with 20 subtracted still not bad flow numbers, we have seen some high dollar stuff that didn't flow 270 intake. Hope this helps.

02WS6#519

So basically I should subtract 20 cfm's and that's were I'm at? So it's a decent port job then, right?

Thanks for the input.
Ever

02WS6#519

I'll take some pics of the heads tomorrow and post them.

Peace
Ever