LS1'35Ford

iTrader: (3)

I had a valve lock break in half on my 317 heads that I bought used and I'm hoping someone can help me figure out whose these are. I'm pretty sure it's still a 7 degree lock but it much thicker than a stock one. The hole in the retainer is much larger. Across the top the lock measured .557" . Pictures with the reatiner compared to a stock lock.

I can see the groove is moved up so maybe it's a height changing lock?

BlackScreaminMachine

iTrader: (17)

Would just would swap out all the springs for a new set. At least then you would know. I know thats not much help but used is used and most time we do not know how much.

LS1'35Ford

iTrader: (3)

I had all the springs off and had them checked and they all are fine. I'd really like to just buy a pair of $2 locks. But who knows what manufacturer made them.

raven154

iTrader: (14)

Honestly they look like patriots to me.

gectek

iTrader: (2)

X2 for patriot

NVR_SPDS

iTrader: (39)

I think they are Patriots too. If im not mistaken, they use Super 7 locks, where alot of others use the stockers. My PRC springs run the stockers.

LS1'35Ford

iTrader: (3)

Thanks guys