Which pushrod length for this setup?
#1
Restricted User
Thread Starter
iTrader: (9)
Join Date: Sep 2002
Location: Sierra Vista, AZ
Posts: 7,603
Likes: 0
Received 0 Likes
on
0 Posts
Which pushrod length for this setup?
Ok, using the Z06 cam in an LS1 motor, with heads shaved .020"? Listening to SDPC you need longer than 7.4 for the smaller base circle of .050", so the hlaf radius would be .025". Now the heads being .020" closer would mean the difference your looking at is only .005" which tells me there is no need to change pushrod length from stock. Is this right?
Thanks,
Charlie.
Thanks,
Charlie.