Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

air puMp

Thread Tools
 
Search this Thread
 
Old Nov 3, 2011 | 03:16 PM
  #1  
camaroman98z28's Avatar
Thread Starter
Teching In
 
Joined: Aug 2011
Posts: 32
Likes: 0
Default air puMp

do i need my air pump? when i first start my car it makes a whinning sound and i took out the fuse and it seems to even run better

Last edited by 01ssreda4; Nov 3, 2011 at 11:17 PM.
Reply
Old Nov 3, 2011 | 08:01 PM
  #2  
3rdCoastPowerSports's Avatar
TECH Fanatic
iTrader: (5)
 
Joined: Jun 2011
Posts: 1,154
Likes: 6
From: Loony Bin
Default

technically by law yes but practically no you don't need it. you do need to do a few things if you choose to delete the air pump... Search air pump delete
Reply
Old Nov 3, 2011 | 08:15 PM
  #3  
joecar's Avatar
TECH Senior Member
20 Year Member
Photogenic
Photoriffic
Shutterbug
 
Joined: Apr 2002
Posts: 6,080
Likes: 17
From: So.Cal.
Default At a minimum...

If the pump is not going to run for at least a few days, remove the hose from the pump, otherwise the hose fills with water (from condensation) and shorts out the pump the next time it runs.
Reply
Old Nov 3, 2011 | 10:06 PM
  #4  
garygnu's Avatar
TECH Senior Member
 
Joined: Feb 2009
Posts: 5,445
Likes: 4
Default

a good air pump will make noise when the car is started .
Reply
Old Nov 4, 2011 | 05:10 AM
  #5  
camaroman98z28's Avatar
Thread Starter
Teching In
 
Joined: Aug 2011
Posts: 32
Likes: 0
Default

thanks for the info all!
Reply
Old Nov 4, 2011 | 05:24 AM
  #6  
Paul Bell's Avatar
That's MISTER MODERATOR
20 Year Member
Photogenic
Liked
Loved
iTrader: (9)
 
Joined: Nov 2005
Posts: 7,615
Likes: 63
From: NYC
Default

The A.I.R. pump only runs and operates when the engine is first started. It puts fresh air into the exhaust. It does not make the engine run better or worse. It has no effect on the engine's performance. When the engine is cold, it adds extra air to the exhaust to lean out the raw fuel in the exhaust which lowers emissions.

As it is an electric motor, it's operation is monitored by the PCM. If you remove it, you'll get a code unless you tune it out.
Reply




All times are GMT -5. The time now is 03:07 AM.