Anyone running or know much about the FTI Hellfire cam?
Thread Starter
TECH Senior Member
iTrader: (27)
Joined: Dec 2009
Posts: 9,728
Likes: 13
From: Jefferson City, MO
Anyone running or know much about the FTI Hellfire cam? Specs are 229/236 111 LSA - .630 - .630
FTI website says a 2000 F-Body with ETP Heads and this cam made 460 rwhp. Just curious if anyone on here is running this cam and can chime in.
FTI website says a 2000 F-Body with ETP Heads and this cam made 460 rwhp. Just curious if anyone on here is running this cam and can chime in.
I was running a version of the hellfire from Ed. Mine was 230/242 .633 .622 on 110lsa. It made 465/435 with stock runner 243's on a 6.0 short block. The intake lobe was very aggressive and killed a set of PAC 1518's in less than 8000 miles
Thread Starter
TECH Senior Member
iTrader: (27)
Joined: Dec 2009
Posts: 9,728
Likes: 13
From: Jefferson City, MO
Thread Starter
TECH Senior Member
iTrader: (27)
Joined: Dec 2009
Posts: 9,728
Likes: 13
From: Jefferson City, MO
When you say you were running a version of the Hellfire cam, does that mean your cam was using the same lobe design/profile as the Hellfire cam. I'm pretty familiar with Ed Curtis cams and know he has several different "profiles" or designs that use the same family of lobes.
