5.3 to 5.7 machine work
Thread Starter
TECH Regular
Joined: Feb 2010
Posts: 433
Likes: 0
From: Louisville
5.3 to 5.7 machine work Like title say going to do a forged h beam rod and piston stock crank setup taking to a 3.905 bore from a factory 5.3 block
What should all machine work cost for the full bottom end machine work and assembly
What should all machine work cost for the full bottom end machine work and assembly
Sounds about right. When calling for quotes, make sure you tell them your going from a 3.7xx bore to 3.905 as the boring process is usually more expensive. They have to make multiple passes with the cutter as to not over heat it.
