Rod question help!
Thread Starter
Registered User
Joined: Oct 2011
Posts: 2
Likes: 0
Rod question help! im looking to buy some rods i have a stock crank and mahle forged pistons. i know stock rod length is 6.125 but the only I beams i can find is 6.100. and ive heard H beams may have clearance issues but they are 6.125. i would rather have I beams but cant find the right length. help!
Thread Starter
Registered User
Joined: Oct 2011
Posts: 2
Likes: 0
well im prolly gonna have about 600 hp with 150 shot but this rod thing is a major headache. i was gonna use my stock rods but the guy at the machine shop said i couldnt because my pistons are floaters and my stock rods are press fit. idk what to do!!!! bout to jus say the hell with it and use my stock pistons!............will the 6.100" I beams work with my set up?
well im prolly gonna have about 600 hp with 150 shot but this rod thing is a major headache. i was gonna use my stock rods but the guy at the machine shop said i couldnt because my pistons are floaters and my stock rods are press fit. idk what to do!!!! bout to jus say the hell with it and use my stock pistons!............will the 6.100" I beams work with my set up?
FWIW
http://www.ws6project.com/user_stor/...olts-927-pin-/
these are the rods I ended up buying. for less than 300 shipped, I couldnt pass it up.
