#243 casting heads
Thread Starter
Launching!
iTrader: (6)
Joined: Feb 2012
Posts: 221
Likes: 15
From: Cape Girardeau, Missouri
I'm not sure about the flow bench. Yet. I will be goin back to north Carolina in late nay to have the work done and possibly. Get another Camaro(79z28 fingers crossed )..
There's some good points being brought up here. Guys are having excellent results with stock LS6 heads, LS6 intake and the EPS 222/226 113lsa cam. Making over 415+rwhp and 400rwtq. For a street car that sees the track once in a while you can't beat that combo.
And its true, a donkey dick cam isn't needed, unless you have a stripped down car for the track and you're looking for every little bit of top end power. Take care.
And its true, a donkey dick cam isn't needed, unless you have a stripped down car for the track and you're looking for every little bit of top end power. Take care.
TECH Addict
Joined: Sep 2009
Posts: 2,481
Likes: 5
From: PA/MD
My advice is do it as you can afford it....you have the heads now, get them pores and bolt them on.....decide on what cam you want, and first get the stall and put it in at the same time or before the cam.
Will the ls1 intake hurt you? Yes, but it will work.....but when you get a good deal on an ls6 or better intake it only takes a few hours to swap them out.
Will the ls1 intake hurt you? Yes, but it will work.....but when you get a good deal on an ls6 or better intake it only takes a few hours to swap them out.
Thread Starter
Launching!
iTrader: (6)
Joined: Feb 2012
Posts: 221
Likes: 15
From: Cape Girardeau, Missouri
my car is a 2002 it came stock with a ls6 intake...i didnt feel that i should had to put it on their...i thouhgt it was well known that 02 z's had the ls6 intake...althou a fast would look right nice sitting in it's place
Thread Starter
Launching!
iTrader: (6)
Joined: Feb 2012
Posts: 221
Likes: 15
From: Cape Girardeau, Missouri
thats the kinda stuff i like to hear....i've busy working on my ignition coils( painting them red).. and i just laid some fresh rubber....i cant wait for her to feel even more stout
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
500 for a VJ and port is cheap. you get what you pay for
455 for LS6 243s is a good deal. people dont realize what your geting. Look up a set of Ti valves, haha
$1600-2000, ya thats just in your valves
455 for LS6 243s is a good deal. people dont realize what your geting. Look up a set of Ti valves, haha
$1600-2000, ya thats just in your valves
