Help identity valvetrain
Thread Starter
Staging Lane
iTrader: (5)
Joined: Mar 2012
Posts: 68
Likes: 0
From: Bay Area, CA (SF area)
Help identity valvetrain Hey Folks,
It would be great if someone could help identity parts of the posted valvetrain for me.
Engine is alleged to have:
Thunder Racing cam 224/224-116
Thunder Racing valve springs
Thunder Racing push rods
I have not pulled the timing gear to verify the cam as of yet.
Below are a few shots that might help, if any. I've been to the Thunder Racing site and the closest cut I could find is a 224/224-114 cam. It may be possible that this was a complete custom cut.
They don't even list any springs under their company so I have no clue about the rods and springs.
BTW, while the engine's out... recommendations to do any repairs/maintenance?
Rear main seal maybe?
It would be great if someone could help identity parts of the posted valvetrain for me.
Engine is alleged to have:
Thunder Racing cam 224/224-116
Thunder Racing valve springs
Thunder Racing push rods
I have not pulled the timing gear to verify the cam as of yet.
Below are a few shots that might help, if any. I've been to the Thunder Racing site and the closest cut I could find is a 224/224-114 cam. It may be possible that this was a complete custom cut.
They don't even list any springs under their company so I have no clue about the rods and springs.
BTW, while the engine's out... recommendations to do any repairs/maintenance?
Rear main seal maybe?
Thread Starter
Staging Lane
iTrader: (5)
Joined: Mar 2012
Posts: 68
Likes: 0
From: Bay Area, CA (SF area)
Check out the pic I have attached (not from the engine posted above). They're 243 heads with comp 918's. Stock ones are yellow.
Last edited by perf0rmance; May 24, 2012 at 03:15 PM.
