Ebay heads???
I don't think he ever really cared to defend cheap heads, just to put another set of real world results on the table. From what I have read, he has not loss of integrity returning with bad results from the heads, due to the fact he was never defending them, just wanted see how they preform.
Besides all that, I am very interested in seeing how they preform. He should post back, (I hope so) no matter what the results. I don't think anyone should give him any disrespect. He is doing us all a favor. My .02
Besides all that, I am very interested in seeing how they preform. He should post back, (I hope so) no matter what the results. I don't think anyone should give him any disrespect. He is doing us all a favor. My .02
On The Tree
Joined: Nov 2012
Posts: 118
Likes: 0
I don't think he ever really cared to defend cheap heads, just to put another set of real world results on the table. From what I have read, he has not loss of integrity returning with bad results from the heads, due to the fact he was never defending them, just wanted see how they preform.
Besides all that, I am very interested in seeing how they preform. He should post back, (I hope so) no matter what the results. I don't think anyone should give him any disrespect. He is doing us all a favor. My .02
Besides all that, I am very interested in seeing how they preform. He should post back, (I hope so) no matter what the results. I don't think anyone should give him any disrespect. He is doing us all a favor. My .02
Frank
why do you care so much what he is doing? Yes i saw all the post. And honestly i believe you were the one who caused more drama than anyone in this thread. Its really no big deal. Don't you think your acting a little childish with all your posts? just saying.
On The Tree
Joined: Nov 2012
Posts: 118
Likes: 0
Frank
I'm with you stevecritt, tired of showvette posting in here. If there hadn't been all this back and forth between Harshreality and showvette, we would probably had seen results by now, good or bad.
On The Tree
Joined: Nov 2012
Posts: 118
Likes: 0
Frank
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Sure makes me hopeful that something new has been posted (like results) only to come see bickering. Lets let it slide gentlemen!?
On The Tree
Joined: Feb 2013
Posts: 110
Likes: 1
From: Lancaster, CA
I get your point dude but you have to understand, there are a whole lot of other people that would like a second opinion. I'd like to see a second opinion on these as well even if they are crap heads (which I'm pretty sure they are anyway). That way if his results turn out to be the same as yours then we can all agree and say "Look, showvette was telling the truth after all!"
Just chill out and enjoy the show, if and when he posts results on these heads, take it easy and give him the credit for giving us all yet another reason why we should stay away from these Chinese paper weights.
On The Tree
Joined: Nov 2012
Posts: 118
Likes: 0
Frank,
I get your point dude but you have to understand, there are a whole lot of other people that would like a second opinion. I'd like to see a second opinion on these as well even if they are crap heads (which I'm pretty sure they are anyway). That way if his results turn out to be the same as yours then we can all agree and say "Look, showvette was telling the truth after all!"
Just chill out and enjoy the show, if and when he posts results on these heads, take it easy and give him the credit for giving us all yet another reason why we should stay away from these Chinese paper weights.
I get your point dude but you have to understand, there are a whole lot of other people that would like a second opinion. I'd like to see a second opinion on these as well even if they are crap heads (which I'm pretty sure they are anyway). That way if his results turn out to be the same as yours then we can all agree and say "Look, showvette was telling the truth after all!"
Just chill out and enjoy the show, if and when he posts results on these heads, take it easy and give him the credit for giving us all yet another reason why we should stay away from these Chinese paper weights.
Frank
Every post you make just makes you look more like the childish ******** that you are.
On The Tree
Joined: Nov 2012
Posts: 118
Likes: 0
At this point, why are you still watching this thread? All I have seen you do is insult anyone who questions what you have posted. It is obvious that you believe these are junk heads. You have a total of 29 posts here, 23 are in this thread, and you keep posting like you own the place, why?
Every post you make just makes you look more like the childish ******** that you are.
Every post you make just makes you look more like the childish ******** that you are.
Frank
BTW, thanks for keeping track of my thread count. As if it's any of your business, I am new to the LS world, but I've been building cars and racing for well over 20 years. I joined this forum because we're building a 2001 Corvette that these heads were supposed to be for. I had the 9th fastest "Bolt On' LT car in the country in '02. My Z has been in GM High Tech twice as well as Chevy High Performance. I also have a '70 Camaro that runs 9.70. Pay real close attention, *******. I'm new to LS motors but I can guarantee you I know more about Performance and racing as a whole than you do. That being said, I know what flow numbers mean, and I know when someone falsly advertises a product. I didn't hack some S10 up and throw a junkyard motor in it!
Frank
Frank
I'm done in here, sorry to everyone else for helping this guy ^^^ crap in the thread.
Last edited by Bowtie316; Apr 20, 2013 at 03:33 PM.
Yeah well I have 21 yrs of race car building experience and I had the 8th fastest lt car in the universe and my '70 camaro went 9.69 in the 1/4 baam! oh and I'm 46. so i have the wisdom also. lol. come on man this is dumb.
BTW, thanks for keeping track of my thread count. As if it's any of your business, I am new to the LS world, but I've been building cars and racing for well over 20 years. I joined this forum because we're building a 2001 Corvette that these heads were supposed to be for. I had the 9th fastest "Bolt On' LT car in the country in '02. My Z has been in GM High Tech twice as well as Chevy High Performance. I also have a '70 Camaro that runs 9.70. Pay real close attention, *******. I'm new to LS motors but I can guarantee you I know more about Performance and racing as a whole than you do. That being said, I know what flow numbers mean, and I know when someone falsly advertises a product. I didn't hack some S10 up and throw a junkyard motor in it!
Frank
Frank
Thanks for sharing your results, we need more of that instead of shitty E-mechanics and E-enginebuilders/tuners giving their random useless .02's that they regurgitate or recycle from others in this section.
Its become apparent that these heads are "hit or miss", you and thompson motorsports have clarified this.
Now i would love to see the results from the OP. Just to clarify im not interested in purchasing these heads.
We came across heads from the same area in california and couldnt pass doing some testing on them. I do not know if these are the same company but have similar pricing and are from the same location. We ordered 18 heads to test on and we were able to test on 2, The other 16 were so wrong in one way or another we sent them back. The 2 we tested on were exactly what we expected, a $600 pair of heads.
YOU GET WHAT YOU PAY FOR. I do not know if these are the same heads we tested with certaninty, just be careful. If you do not have the money to throw away you might want to look for something that is known good.
YOU GET WHAT YOU PAY FOR. I do not know if these are the same heads we tested with certaninty, just be careful. If you do not have the money to throw away you might want to look for something that is known good.
I meant in the sense of them being usable. Thats usually the problem with cheap ebay products though, no quality control.