Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

comp cams 54-000-11

Thread Tools
 
Search this Thread
 
Old 04-02-2004 | 09:26 PM
  #1  
tonyt123blue's Avatar
Thread Starter
Launching!
iTrader: (8)
 
Joined: Oct 2003
Posts: 277
Likes: 0
From: lexington,ky
Default how good is this cam

Does this cam require tuning?222-226w/566-569 lift 114 ls if not how much power gain thru long tubes and cat back?also how much lope?

Last edited by tonyt123blue; 04-03-2004 at 12:19 AM.
Old 04-03-2004 | 02:03 AM
  #2  
PREDATOR-Z's Avatar
TECH Senior Member

 
Joined: Mar 2004
Posts: 14,620
Likes: 16
From: BFE
Default

Yes on tuning, medium lope, Loves N20, depending on other mods can achieve over 400rwhp easy with heads, and best of all, is not too hard on the valvetrain. IMO a good nitrous/street cam.
Old 04-03-2004 | 07:36 AM
  #3  
CamM's Avatar
Launching!
 
Joined: Jan 2002
Posts: 201
Likes: 0
From: Sachse, TX
Default

When I had that cam installed, I didn't NEED tuning right away, it had good drivability right out of the box. That cam has some lope, but nothing radical...no idle issues. With all the bolt-ons, stock rear, stock heads, M6 car, my best dyno was 377rwhp/371tq. Very respectable numbers.
Old 04-03-2004 | 12:50 PM
  #4  
PREDATOR-Z's Avatar
TECH Senior Member

 
Joined: Mar 2004
Posts: 14,620
Likes: 16
From: BFE
Default

That is a low number 375rwhp for that cam, a 216/220 can achieve 400rwhp with full bolt ons and the right tuning..



Quick Reply: comp cams 54-000-11



All times are GMT -5. The time now is 08:10 PM.