LS6 crate engine storage?
Thread Starter
Staging Lane
Joined: Jan 2004
Posts: 96
Likes: 0
LS6 crate engine storage? What would be a good way to store this motor for around 3 years? Some say to back off of the rockers to relieve spring pressure and fog the motor with a marine spray. It's being stored in the original crate with that paper GM uses and sealed in a plastic bag,every now and then I spin the engine. Is this good enough or should I back off the rockers?
Trending Topics
Absolutely back off the rockers. Your springs will develop "memory" if they are in the same compressed state for a long time.
I would tape every part of the motor shut, including intake, exhaust, after giving a good dose of lubricant. My grandfather used to pour part of a quart of oil into every motor on his farm that was going to be stored for winter. Then he would go through a roll of duct tape.
I would also get a motor bag from Jeg's or Summit. Keeps the dust, and industrial fallout off the motor.
I would tape every part of the motor shut, including intake, exhaust, after giving a good dose of lubricant. My grandfather used to pour part of a quart of oil into every motor on his farm that was going to be stored for winter. Then he would go through a roll of duct tape.
I would also get a motor bag from Jeg's or Summit. Keeps the dust, and industrial fallout off the motor.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo Thread Starter
Staging Lane
Joined: Jan 2004
Posts: 96
Likes: 0
I've decided not to back off the rockers and spin the motor a quarter of a turn a week to open and close the springs and valves.The engine comes filled w/oil and GM's EOS assembly lubricant which should protect the internals while in hibernation mode.I'm also going to seal off any opening's like the exhaust manifold's etc... Thanks for the help
