new code with heads and cam install
Thread Starter
Staging Lane
Joined: Jan 2004
Posts: 87
Likes: 0
From: Anchorage Alaska
new code with heads and cam install Getting a p 0106 absolute manifold pressure code as well as asr off light is intermittently on and off. Did a search, found a few people with the problem but no solutions. Any one have any ideas.
On The Tree
Joined: Dec 2003
Posts: 163
Likes: 0
From: brighton mich.
there is about a 95% chance that the m.a.p.senser is shot. also your never going to get it idling good if you dont get a tune up. the reason I now what your talking about is I just had a cam install and thru the same code , the shop where I had it done couldnt get a good tune on the mustang, and figured out it was the map. replaced it , was then able to get a accurate tune. and yes it was doing the same thing yours was doing.
Thread Starter
Staging Lane
Joined: Jan 2004
Posts: 87
Likes: 0
From: Anchorage Alaska
The map sensor sits tight and the vacum line is connected up to the vacum line that runs in to the car. The tune is a mail order from Tsp. I've called them but not got a response yet. Car runs well, and actualy idles pretty good too.
I had that same code when I installed my TSP231/237 cam. I called Jason @ TSP and he fixed it via tuning in LS1edit. check out the tuning forum here, there are a couple of guys that had this problem on the larger cams. Call Jason Monday and tell him about it, he'll let you in on how to fix it.
