Putting together a LS1
Thread Starter
TECH Enthusiast
Joined: Feb 2006
Posts: 599
Likes: 0
From: NewBern NC/Lake Havasu City AZ
Putting together a LS1 Im usually on the truck side of the house, but since im doing an 5.7 ls1 this time, ive reading a bit over here. My build so far, and I was wondering about how much hp im looking at here. Thanks
2000 ls1 block
05 5.3 crank and rods(rods have been balanced)
SDPC 5.3 CNC ported heads (not milled) but have the 2.00/1.55 valves 62cc
Ls7 lifters/trays
Dual valve springs/retainers/viton seals
Lunati Vodoo 227/232 .584 .584 113 lsa
Kieth black flat top pistons
Manley pushrods 7.4s
MLS head gaskets
ARP Head stud kit
LS6 ported oil pump
Sealed power rings
Long tube headers/catless Y
stock truck intake and throttle body(for now)
Marine 8.1 injectors
I was hoping to be around 500 on motor
am I close?
2000 ls1 block
05 5.3 crank and rods(rods have been balanced)
SDPC 5.3 CNC ported heads (not milled) but have the 2.00/1.55 valves 62cc
Ls7 lifters/trays
Dual valve springs/retainers/viton seals
Lunati Vodoo 227/232 .584 .584 113 lsa
Kieth black flat top pistons
Manley pushrods 7.4s
MLS head gaskets
ARP Head stud kit
LS6 ported oil pump
Sealed power rings
Long tube headers/catless Y
stock truck intake and throttle body(for now)
Marine 8.1 injectors
I was hoping to be around 500 on motor
am I close?
