Oil Pressure Problems
Just want to add...IF you check the rods for roundness, you'll have to remove the heads in order to remove the pistons. As far as I know, the pistons cannot be removed from underneath the block, bec the webbing will interfere with some, or all of them.
I did not check the rods when doing the bearings.
Once again, your choice.
I did not check the rods when doing the bearings.
Once again, your choice.
Just want to add...IF you check the rods for roundness, you'll have to remove the heads in order to remove the pistons. As far as I know, the pistons cannot be removed from underneath the block, bec the webbing will interfere with some, or all of them.
I did not check the rods when doing the bearings.
Once again, your choice.
I did not check the rods when doing the bearings.
Once again, your choice.
