Should I return these?
the lunati box was ajar and the lifters were out of the styrofoam packing just sliding around. The box holding the lunati box from Hinson supercars was not damaged.
I've contacted hinson and sent pics and am awaiting resolution, hopefully get a set of new ones...I feel uneasy about this set with these 2 looking this rough.
I've contacted hinson and sent pics and am awaiting resolution, hopefully get a set of new ones...I feel uneasy about this set with these 2 looking this rough.
really? look at the first pic. see the 3 lines or what look like 3 stress cracks where the body meets the roller. On one of the other pics there is a small chunk missing on the left side. Im not saying you couldn't run them but if I bought some new lifters and those were what showed up I would be sending them back.
Trending Topics
I always see this with ls7 lifters, yours actually look good compared to a set I had awhile back. typical mass production flaws, they probably pump hundreds out a minute and dont check them at all..
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo really? look at the first pic. see the 3 lines or what look like 3 stress cracks where the body meets the roller. On one of the other pics there is a small chunk missing on the left side. Im not saying you couldn't run them but if I bought some new lifters and those were what showed up I would be sending them back.
But I agree, they look kind of rough, would like to get a better set. or just replace the couple that are chipping near the roller.
I send pics to brian@hsc so we'll see what he thinks about these link bar lifters. Will update when he replies.
Working on that with Brian at hinson motorsports. They told me to send them pics to see what they can do.
I have a set of non link bars and they don't look like these
So I don't know if they were damaged on shipping or from morel when they were made.
I have a set of non link bars and they don't look like these
So I don't know if they were damaged on shipping or from morel when they were made.