question about the Vindicator cam shaft
Thread Starter
Teching In
Joined: Jul 2012
Posts: 31
Likes: 0
From: Boardman Ohio
question about the Vindicator cam shaft Hey guys summer is brewing so its time for me to blow some money on my car. I have recently been thinking about buying the vindicator camshaft which is 240/244 .605/.596 112 LSA... I will be buying 4500 stall in the next couple weeks...
my question is will it run fine with the set up I have I have a GM hot cam right now.
243 heads( not ported or milled )
Full Michael Boltons
and soon yank 4500 stall
is there anything else that will be required before the install of the Vindicator?
my question is will it run fine with the set up I have I have a GM hot cam right now.
243 heads( not ported or milled )
Full Michael Boltons
and soon yank 4500 stall
is there anything else that will be required before the install of the Vindicator?
what other parts do you have? Mileage?
I would recommend some upgraded springs. The BTR Doublespring kit from Brian tooley racing are good up to .660" lift.
some hardened pushrods But measure first.
oil pump, timing chain...
I would recommend some upgraded springs. The BTR Doublespring kit from Brian tooley racing are good up to .660" lift.
some hardened pushrods But measure first.
oil pump, timing chain...
Thread Starter
Teching In
Joined: Jul 2012
Posts: 31
Likes: 0
From: Boardman Ohio
oh and I am sorry I just hit 40,000 millage today actually
