Slp double roller timing chain clearance?
Thread Starter
Launching!
Joined: Jun 2011
Posts: 245
Likes: 0
From: Honolulu, Hawaii
Slp double roller timing chain clearance? On my cam swap on my 99ss I got a slp double roller timing set. Am I going to have clearance issues with my double roller timing chain with the front cover?
Thread Starter
Launching!
Joined: Jun 2011
Posts: 245
Likes: 0
From: Honolulu, Hawaii
It came with a slp oil pump as akit. Do you know if the slp comes with it? I'll have too look...
Also what is the best way too press the crank timing sprocket back on the crank?
Also what is the best way too press the crank timing sprocket back on the crank?
No shims required with the SLP pump. The casting has the clearance built in. According to the instructions, some clearancing of the cover may be required to clear the pump. It sticks out further.
Ron
Ron
Thread Starter
Launching!
Joined: Jun 2011
Posts: 245
Likes: 0
From: Honolulu, Hawaii
Ok thanks y'all. Any suggestions on the best puller to rent from the local orielys or napa, to pull the crank timing sprocket. And what is the best way to press on the crank sprocket without ruining it?
