LS1 Flycutting depth
LS1 Flycutting depth I was looking for a rough estimate on how deep to fly cut my pistons.
LS1
PRC Stage 2.5 5.3L heads. Milled but not sure how much exactly
LG G5X3 Cam 114° lobe seperation
LS7 lifters
I will do measurements myself, this is just to help me make sure I am in the ball park.
LS1
PRC Stage 2.5 5.3L heads. Milled but not sure how much exactly
LG G5X3 Cam 114° lobe seperation
LS7 lifters
I will do measurements myself, this is just to help me make sure I am in the ball park.
I had to fly cut my intake valve .50 and exhaust .020 ,with a ms4 and prc ls6 2.5 head and thin head gasket..but I did the clay method to figure out how much I needed out..I wanted a safe .100 intake and .080 exhaust.
LS1Tech Sponsor
Joined: Mar 2013
Posts: 288
Likes: 1
From: Mooresville, NC
Are the heads off the car right now? I can calculate and give you a really good idea of what P2V to expect or if your interested spec a custom cam that will have P2V
__________________
See what's in our shop on Facebook! Customer Build Blogs!
www.pcmofnc.com
Performance Installs - Dyno Tuning - Custom Camshafts & Valvetrain - Remote HPtuners Tuning - Mail Order Tuning & Sales
704-307-4227
See what's in our shop on Facebook! Customer Build Blogs!
www.pcmofnc.com
Performance Installs - Dyno Tuning - Custom Camshafts & Valvetrain - Remote HPtuners Tuning - Mail Order Tuning & Sales
704-307-4227
