Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Torquer 2 guys....HELP (Again)

Thread Tools
 
Search this Thread
 
Old Jul 20, 2013 | 07:03 PM
  #21  
Comin' Thunder's Avatar
Thread Starter
On The Tree
iTrader: (5)
 
Joined: Nov 2004
Posts: 155
Likes: 0
From: Beavercreek, Ohio
Default

Thanks dudes.
Reply
Old Jul 21, 2013 | 08:30 PM
  #22  
CROOKS's Avatar
Teching In
iTrader: (5)
 
Joined: Sep 2012
Posts: 32
Likes: 0
Default

https://ls1tech.com/forums/midwester...hops-ohio.html
Reply
Old Jul 21, 2013 | 10:15 PM
  #23  
PREDATOR-Z's Avatar
TECH Senior Member
 
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
Default

The springs are not the issue here. BTW guys, beehives in a cam only setup are better than duals. They have better harmonic control.
As far as power, what was your base numbers (before cam)? And was that on the same dyno? or are you comparing 2 different ones?
That cam is capable of a healthy 35 to 40 rwhp gain.
Reply
Old Jul 23, 2013 | 07:32 PM
  #24  
squirlNUTZ's Avatar
TECH Apprentice
15 Year Member
Photogenic
Liked
Loved
 
Joined: Jun 2009
Posts: 318
Likes: 5
From: Oklahoma
Default

Yea yea two days later... Update.
And predator could be correct on the spring. But toward predator, the numbers were from the same shop same dyno as posted by OP.
Reply




All times are GMT -5. The time now is 06:46 AM.