E85 with a 12.5.1 compression 408
09-26-2013, 12:33 PM
#1
Teching In
Thread Starter
Join Date: Dec 2005
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
E85 with a 12.5.1 compression 408 Ok so wanting to possibly convert to e85 I have a pretty healthy 408 and I have pretty high compression. I have 255 fuel pump with hot wire, 42lb injectors, fast fuel rails. And prolly some other might be forgetting, what else would I have to do and what advantage and disadvantages. Also plan to run about 200-250 dp nitrous kit next spring. Any advice appreciated!
09-26-2013, 03:31 PM
#5
Teching In
Thread Starter
Join Date: Dec 2005
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
I have an braided line until dropes down by the fuel filter. Gray86hatch I figure ill have to do twin in tanks or an a1000, haven't had it dynoed or wideopen throttle tune yet. Still pretty fresh motor and everything for that matter. But I think it should be close to 500hp with my set up.
