Need help with cam selection.
Thread Starter
Staging Lane
Joined: Aug 2013
Posts: 72
Likes: 0
Need help with cam selection. I have a 346 ls lower end, with arp rod bolts. Hand ported 243s and either a fast 92 or 102. 1 7/8 longtube headers. Gonna be na most of the time, with a shot of 125 for the race days. Auto car with a ss3600 with 373 gears. This car is not a dd.
Call Tick for a popular performer like this one here......
http://www.tickperformance.com/tick-...1-ls6-engines/
Not saying this is the perfect one for you but he can custom spec one for you
as well as EPS or TSP.....can't go wrong with any of them
http://www.tickperformance.com/tick-...1-ls6-engines/
Not saying this is the perfect one for you but he can custom spec one for you
as well as EPS or TSP.....can't go wrong with any of them
Brian Tooley, Martin @ Tick, Ed Curtis... Pick your poison. 
Brian Tooley has a 231/242 .617"/.588" 112+2 (BTR Stage III) that would work well with that stall and the 243s.
EPS also has good stuff, but there is a lengthy wait on the cams. Tooley can get you stuff in a couple of days. So can Tick. But I would prefer to buy Comp Cams off the shelf. Their custom stuff can be off a few degrees. But if you buy in bulk, like Tooley/TSP/Tick does for their shelf cams, they are pretty accurate.
EPS also has good stuff, but there is a lengthy wait on the cams. Tooley can get you stuff in a couple of days. So can Tick. But I would prefer to buy Comp Cams off the shelf. Their custom stuff can be off a few degrees. But if you buy in bulk, like Tooley/TSP/Tick does for their shelf cams, they are pretty accurate.
