Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

any dual spring install tips???

Old May 12, 2004 | 05:29 PM
  #1  
dvandentop's Avatar
Thread Starter
TECH Enthusiast
iTrader: (1)
 
Joined: Nov 2001
Posts: 626
Likes: 0
From: sioux falls sd
Default any dual spring install tips???

having problems with inner spring keeps popping out of spring compressor when trying to install these crane springs



any tips on how to get it so it doesnt do this???

or any other tips?
Reply
Old May 12, 2004 | 05:56 PM
  #2  
JDPZ28's Avatar
TECH Enthusiast
iTrader: (3)
 
Joined: Oct 2003
Posts: 586
Likes: 0
From: Holly Springs, NC
Default

I had the same problem bought a compressor from Autozone that screws in from the topand had longer extensions on the arms and that just barely worked. Do a search for the Larry tool. I just e-mailed him about buying one but he needs 20 orders to have them made. I will definitely use his tool next time! will make spring changes a snap.
Reply
Old May 12, 2004 | 06:59 PM
  #3  
HumpinSS's Avatar
FormerVendor
iTrader: (1)
 
Joined: Feb 2002
Posts: 3,059
Likes: 0
From: Waldorf, MD
Default

Cant beat this tool with a stick




Two springs at once and it doesnt put any loads on the rocker arm stud bolt
Reply
Old May 12, 2004 | 07:02 PM
  #4  
JDPZ28's Avatar
TECH Enthusiast
iTrader: (3)
 
Joined: Oct 2003
Posts: 586
Likes: 0
From: Holly Springs, NC
Default

Where can I get one of those HumpinSS?
Reply
Old May 12, 2004 | 07:23 PM
  #5  
HumpinSS's Avatar
FormerVendor
iTrader: (1)
 
Joined: Feb 2002
Posts: 3,059
Likes: 0
From: Waldorf, MD
Default

http://www.vincihighperformance.com/

Sponsor to the left ------------------------------>

100+ shipped to your door
Reply
Old May 13, 2004 | 01:24 AM
  #6  
dvandentop's Avatar
Thread Starter
TECH Enthusiast
iTrader: (1)
 
Joined: Nov 2001
Posts: 626
Likes: 0
From: sioux falls sd
Default

damn i need to find another since we tried weldng some extensions on but that worked for about 3 springs then the weld got weak
Reply
Old May 13, 2004 | 07:44 AM
  #7  
smithsc's Avatar
Staging Lane
 
Joined: Mar 2004
Posts: 54
Likes: 0
From: Kansas City, KS
Default

I just put a set of Comp921 dual springs using the More valve spring tool and it was a piece of cake. No problems whatsoever, even getting to the back set of springs.

The More tool is available from several of the sponsors.

Steve
Reply
Old May 13, 2004 | 08:08 AM
  #8  
Ben01C5's Avatar
Launching!
 
Joined: Nov 2003
Posts: 224
Likes: 0
From: Seoul, Korea
Default

I used Larry's tool to install a few broken and then take out all the REV 1116's I was running.

That tool from vinci looks awesome, and would be a lot faster.
Reply
Old May 13, 2004 | 10:02 AM
  #9  
dvandentop's Avatar
Thread Starter
TECH Enthusiast
iTrader: (1)
 
Joined: Nov 2001
Posts: 626
Likes: 0
From: sioux falls sd
Default

well i need something i can get TODAY?
Reply
Old May 13, 2004 | 11:06 AM
  #10  
99C5JA's Avatar
TECH Enthusiast
 
Joined: Jul 2003
Posts: 507
Likes: 2
From: Ankeny, IA
Default

Derek, I have the More compressor if you want to drive down to IA and get it. So when are you tearing into YOUR car .
Reply
Old May 13, 2004 | 11:08 AM
  #11  
dvandentop's Avatar
Thread Starter
TECH Enthusiast
iTrader: (1)
 
Joined: Nov 2001
Posts: 626
Likes: 0
From: sioux falls sd
Default

well it is in my friends SS and he lives in orange city IA

too bad i didnt know this before i coulda paid ya to borrow it?

have appointment at doug rippie tomorrow for a tune only thing left is to install the 13 new springs, since cheapy compressor did the trick for a few of them til it crapped out
Reply
Old May 13, 2004 | 11:12 AM
  #12  
dvandentop's Avatar
Thread Starter
TECH Enthusiast
iTrader: (1)
 
Joined: Nov 2001
Posts: 626
Likes: 0
From: sioux falls sd
Default

wonder if ya could greyhound bus ship it up to sioux city today ??
Reply
Old May 13, 2004 | 11:13 AM
  #13  
99C5JA's Avatar
TECH Enthusiast
 
Joined: Jul 2003
Posts: 507
Likes: 2
From: Ankeny, IA
Default

You could have borrowed it for free. Still can if you want to drive to Nevada.
Reply
Old May 13, 2004 | 12:06 PM
  #14  
dvandentop's Avatar
Thread Starter
TECH Enthusiast
iTrader: (1)
 
Joined: Nov 2001
Posts: 626
Likes: 0
From: sioux falls sd
Default

not gonna happen today joel

also just bought the same one mitchell used for his install it better work!
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:47 AM.