cryoing crank ?
cryo
Originally Posted by redaddiction
I have a crank that I want to cryo so who does this service ? Thanks.
Cryo Science 760-427-2796
Steve Demirjian
Race Engine Development
Teching In
Joined: May 2004
Posts: 1
Likes: 0
Originally Posted by redaddiction
I have a crank that I want to cryo so who does this service ? Thanks.
-Jeb Burnett, Pres.
Deep Freeze Cryogenics, LLC
www.deepfreezecryo.com
(866) 324-2796
Originally Posted by foff667
what are the advantages of this?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
stock rods The stock rods are powdered metal. I doubt that cryo treatment would do much to improve strength.
Cryo works great on gears. I always cryo all the valve train parts on any engines I build here. That includes, cam, lifters (both flat and roller), pushrods, valve springs and rocker arms (both steel and aluminum). I find springs will last roughly twice as long as without cryo.
The local Viper shop has Cryo Science do the brake rotors on their road race cars. Rotors now last all season where before they had to change them after almost every race.
Cryo has almost no effect on titanium by the way. That's why I didn't list valves in my valve train list.
Steve Demirjian
Race Engine Development
Cryo works great on gears. I always cryo all the valve train parts on any engines I build here. That includes, cam, lifters (both flat and roller), pushrods, valve springs and rocker arms (both steel and aluminum). I find springs will last roughly twice as long as without cryo.
The local Viper shop has Cryo Science do the brake rotors on their road race cars. Rotors now last all season where before they had to change them after almost every race.
Cryo has almost no effect on titanium by the way. That's why I didn't list valves in my valve train list.
Steve Demirjian
Race Engine Development
Originally Posted by The Guy in MY 99TA
What about cyro'ing stock rods? would it be beneficial? I don't think that I really need a set of aftermarket rods so I was wondering about the stockers.
Josh S.
Josh S.
