Melling ls1 sleeves
Thread Starter
Registered User
Joined: Jun 2014
Posts: 2
Likes: 0
Melling ls1 sleeves Being very new to the ls1 I jumped the gun and picked up an 2000-2001 c5 ls1 5.7 500$ for a lobg block. I was told it would need a bore but did not know they could only got .010oversize.
I have 3 cylinders that had water in I will know Friday if they will clean up at .010. However I'm looking for options on if they by chance won't. Their will be no charge to have the block sleeved if I need to put 3 in cost will only be price of sleeves. The engine will only get a cam and heads and a little more compression. Would the melling sleeves be ok for this application
Thanks
I have 3 cylinders that had water in I will know Friday if they will clean up at .010. However I'm looking for options on if they by chance won't. Their will be no charge to have the block sleeved if I need to put 3 in cost will only be price of sleeves. The engine will only get a cam and heads and a little more compression. Would the melling sleeves be ok for this application
Thanks
