Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Ram clutches

Thread Tools
 
Search this Thread
 
Old Aug 31, 2014 | 09:08 AM
  #1  
Jacktuner's Avatar
Thread Starter
On The Tree
10 Year Member
 
Joined: Jan 2013
Posts: 191
Likes: 0
From: Newcastle
Default Ram clutches

Whats peoples experience with RAM clutches? Are the reliable and good quality? Thanks
Reply
Old Aug 31, 2014 | 06:01 PM
  #2  
VandykeT/A's Avatar
10 Second Club
10 Year Member
 
Joined: Jan 2010
Posts: 2,317
Likes: 20
From: Hurley, VA
Default

I've ran two RAMs. A power grip hd and a power grip. The hd had 25k on it and seen several 1.5 and 1.6 60s and even more 6500 plus clutch dumps. I replaced it while it was out but it was going strong. This was on a heads cam car. It had a lot of chatter at times tho. The power grip has probably 20k on it and seen some 1.7 and is still in the car doing fine. A lot of people I've read have had bad experiences but I didn't. I never sprayed it either tho.
Reply
Old Sep 1, 2014 | 11:08 AM
  #3  
.boB's Avatar
TECH Resident
iTrader: (1)
 
Joined: Jan 2014
Posts: 897
Likes: 33
From: Colorado Springs, CO
Default

I'm using a Ram HD in a high HP low,weight car. It's mostly street driven, with some road racing. I'm not afraid to beat on it fairly hard.

There is some chatter when cold, otherwise it's smooth. There is definitely more pedal effort than a Weber or Centerforce. And it uses the same Valeo hat that everyone else uses.

It's been in there for two years now, and appears to be holding up well.
Reply




All times are GMT -5. The time now is 09:43 PM.