Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Perfect Cam for this stall

Thread Tools
 
Search this Thread
 
Old May 22, 2004 | 11:14 PM
  #1  
TheHauntedZ28's Avatar
Thread Starter
On The Tree
 
Joined: Feb 2004
Posts: 147
Likes: 0
From: Pharr, TX
Default Perfect Cam for this stall

224-224-114 .563/.563... Would this be a good cam to compliment a SSF3500?
Reply
Old May 22, 2004 | 11:31 PM
  #2  
foff667's Avatar
LS1TECH Sponsor
iTrader: (2)
 
Joined: Jul 2003
Posts: 7,986
Likes: 3
From: Clermont, FL
Default

eh...the 3500 really isnt a converter for a cammed car, only because that cam will probably make peak hp around 6300-6500 & peak tq at around 5000 rpms so the converter wont flash into your powerband...the cam will be about as good as it gets but definitly not a perfect match. Id also go for a 112+2 if possible.
Reply
Old May 22, 2004 | 11:36 PM
  #3  
jrp's Avatar
jrp
SN95 Director
20 Year Member
iTrader: (16)
 
Joined: Jul 2003
Posts: 10,755
Likes: 7
From: Valencia, Ca
Default

TC chart

Tbryne also has a TC guide under there TC section
Reply




All times are GMT -5. The time now is 05:31 PM.