Ls1 standalone harness help transmission help also?
Thread Starter
Teching In
Joined: Apr 2014
Posts: 6
Likes: 0
From: topeka
Ls1 standalone harness help transmission help also? Ok so I have a 5.3 that I have converted the harness into a stand alone. Runs fine no problem. Now I wanna switch from the 4l60e to the turbo 350 or 400. What do I need to do to the harness so this works. Looking for help ASAP. Thanks
Also looking at putting a 5.3 into a silverado with the 4.8 5 speed for a daily driver. Wondering what I need to do to that harness as we'll and what plugs I need to leave on it tranny wise. Thanks again in advNce for the help.
Also looking at putting a 5.3 into a silverado with the 4.8 5 speed for a daily driver. Wondering what I need to do to that harness as we'll and what plugs I need to leave on it tranny wise. Thanks again in advNce for the help.
Hey Wake, welcome to LS1tech!
You have no responses because this is the internal engine section-cranks, oil pumps, pistons & stuff. You know, inside the engine things.
You question is pretty much transmission stuff so head over to the automatic transmission section and they'll get you shifting when you want it.
https://ls1tech.com/forums/automatic-transmission-13/
You have no responses because this is the internal engine section-cranks, oil pumps, pistons & stuff. You know, inside the engine things.
You question is pretty much transmission stuff so head over to the automatic transmission section and they'll get you shifting when you want it.
https://ls1tech.com/forums/automatic-transmission-13/
